小型煤矿低浓度瓦斯发电技术及应用效果研究

针对云南富源县辖区内大量小型煤矿抽采的低浓度瓦斯未开展有效利用的问题，以区内某小型煤矿为背景，采用现场调研、分析归纳、理论计算相结合的方法对其低浓度瓦斯发电项目展开分析研究。研究表明，某小型煤矿低浓度瓦斯发电项目成功的关键是“瓦斯治理先行”理念主导下的气源保障综合技术体系。在气源得以保障的基础上，该小型煤矿低浓度瓦斯发电项目已经持续高效运行4年，每年创造经济收益约403.2万元，减排CO2约4.47万t；同时促进了煤矿瓦斯治理工作有效落实，提高了煤矿安全生产水平，保障了煤矿产量的达标。     

慢刀伺服车削刀具半径定向补偿的分段逼近求解

复杂曲面的慢刀伺服车削加工过程中，采用刀具法向补偿算法会在各个直线轴产生补偿量，加工法向矢量突变的曲面时，这种算法并非最优，将补偿量只应用于负载较低的直线轴却是更优的选择。提出一种基于线段逼近的刀具半径定向补偿数值求解算法来求解定向刀位点，通过半径细分的策略使法向误差收敛。算法实例验证及与相关算法的对比结果显示，该算法适用于点云构成的曲面或分段曲面的刀具半径补偿。     

基于修正等速运动规律的自由曲面多轴加工刀轴序列优化方法

针对自由曲面多轴加工中起始位置处刀具相对工件速度、加速度不为零导致的一定程度刚性冲击现象,提出了一种基于修正等速运动规律的刀轴序列优化方法,通过控制工件坐标系中决定刀具姿态的两个约束角,使之变化遵循修正等速运动规律,获得了切削行上平稳变化的刀轴序列,避免了由于起始位置处刀具相对工件速度、加速度不为零导致刀具不能精准到达后续加工位置的现象。算例分析表明,该方法能产生平稳且光滑的刀轴序列,可一定程度改善机床运动性能,提高加工表面质量。     

Hydrothermal Carbonization of Sewage Sludge: Analysis of Process Severity and Solid Content

Hydrothermal carbonization of sewage sludge was carried out with the aim to evaluate the influence of process severity and initial solid content. Response surface methodology was applied to model yield and C yield responses. Enhanced dewaterability performance was recorded under mild processing conditions. The treatment promoted concentration and immobilization of Pb, Cd, Ni, Zn, and Cu. Variation of the solid content showed a stronger influence than severity on average yield and C yield. Higher heating values (HHVs) and energy retention efficiencies (EREs) of hydrochars obtained at the lowest solid content displayed the lowest values. Hence, the energy requirements of a first dewatering step should be compared with the related improvement in terms of HHV and ERE when sludge is used as feedstock.     

三山岛北部海域金矿大规模海下开采地表岩移预测分析

三山岛北部海域金矿赋存于海平面下,设计生产能力达到12 000t/d,水下开采技术难度大,若矿体开采强度过高、顶柱隔离层保留不足,将可能造成海床沉降变形,引发海水倒灌的风险。根据矿床开采技术条件,在获取有限岩石力学参数条件下,本次采用软件模拟分析了海下矿床上向充填法开采条件下的地表岩移特征。研究结果表明,地表沉降变形最大值分布于矿体上盘区域,随着开采由深部逐渐转入浅部区域,地表沉降变形不断增大,研究建议留设160m顶柱,能够保证海下矿体安全开采。     

放顶煤液压支架在土耳其IMABT煤矿现场的应用

通过对土耳其IMBAT煤矿地质条件的分析研究，结合多种选型计算方法的验证，最终选择了合适的设备，使该矿的开采效率得到较大提升。同时也扩大了我国的煤炭开采装备应用范围。根据在土耳其IMBAT煤矿现场多年的服务经验，将理论与实践相结合，就综采放顶煤液压支架在土耳其IMABT煤矿现场的应用进行了论述。     

Predictive association of metal–organic systems in the solid-state: the molecular electrostatic potential based approach

Designing crystalline solids with improved properties or performances remains a challenging task, despite great strides that have been made within the field of crystal engineering since its birth several decades ago. Herein, we are bringing examples that illustrate recent successes in taking supramolecular synthetic guidelines from the organic crystal engineering and adjusting those to metal-containing systems, particularly to the lower-dimensional ones. The versatility of calculated molecular electrostatic potential (MEP) as a new crystal engineering tool is demonstrated.     

Theoretical and experimental studies of a new aniline derivative corrosion inhibitor for mild steel in acid medium

4-Chloro-N-(pyridin-2-ylmethyl)aniline (CPYA) was synthesized by a simple and inexpensive method and tested as a corrosion inhibitor in acid medium for mild steel by using gravimetric studies and electrochemical measurements. An average maximum efficiency of 96.0% was achieved at 4.59 mmol/L. Corrosion kinetic and thermodynamic parameters were also analyzed. Surface analyses (atomic force microscopy and scanning electron microscopy) show that protection is enabled by adsorption on the metal, forming a film. Quantum chemical calculations were performed to access information regarding the molecular structure in the corrosive medium and to support interpretation of the results obtained by experimental methods.     

Hand hygiene and surface cleaning should be paired for prevention of fomite transmission

Touching contaminated surfaces might lead to the spread of pathogens, that is, the fomite transmission route. Although hand- and surface-hygiene practices are potentially important non-pharmaceutical interventions for the fomite route, the two interventions have been mostly studied separately in the literature. In this study, we develop a new conceptual model based on the law of mass action, analyze the temporal diffusion of contaminated surfaces and hands, and verify the model with simulations in an assumed norovirus outbreak in a buffet restaurant. A quantitative hygiene criterion is developed for the required frequency of surface disinfection and hand hygiene to control the fomite transmission in indoor environments. To eliminate surface contaminations, the product of pathogen-removal rates (including hygiene and natural death) on hands and surfaces must be no smaller than that of the human hand and surface contact frequency (ie, the net removal product must be non-negative). When the net removal product is negative, the number of contaminated surfaces and hands would show a logistic growth trend and finally approach the equilibrium. Our approach sheds light into how to optimize the combined use of hand hygiene and environmental decontamination for the best effectiveness under different settings.